2 year warranty
If you notice that the Calc/Clean light?is on steadily or the machine displays?a prompt for descaling, this indicates that the time to descale your Philips Espresso Machine has arrived. It is important to descale your espresso machine regularly to obtain optimal coffee temperature and taste. Follow the steps or watch the videos on how to do this at home.
Please note that when descaling your Philips Espresso Machine, you should use Philips descaler only (Descaling solution CA6700).
It is also important not to interrupt the descaling process once it has started. Please keep in mind that, in some cases, this process can take up to 30?minutes.

Descaling procedure:
1. Empty the drip tray and place it back in.
2. If present, remove the classic milk frother or LatteGo from the machine.
3. If an AquaClean filter is present, remove it from the water tank.
4.?Empty the water tank and pour the entire bottle of Philips descaler solution into it. ?Add water to the descaling solution in the water tank up to the Calc/Clean indication and place it back.
5. Place a large container bowl (1.5?L) under the coffee and water spout.
6. Switch the machine ON.
7. Press and hold the Calc/Clean icon for 3?seconds, then press the start/stop button to start the descaling procedure
8. During the descaling cycle, the Calc/Clean light will flash to show that descaling is in progress.
9. The machine will start dispensing small amounts of water through the coffee and hot water spout 10. Let the machine dispense the descaling solution until the water tank is empty. The empty water tank light icon will light up.
11. Remove the bowl.
12. Remove the water tank and give it a rinse with fresh water.
13. Fill up the water tank with fresh water up to the Calc/Clean indicator and place it back into the machine.
14. Place the emptied bowl back under the coffee and water spout and continue with the rinsing procedure below.
Rinsing procedure:
1. Press the start/stop button to start the rinsing cycle. This process will take about 3?minutes.
2. During this process, the lights on the control panel will go on and off to indicate that the rinsing cycle is in progress.
3. Once the machine stops dispensing water, the descaling process is complete.
4. The machine will heat up automatically.
5. When the lights in the drink icons light up continuously, the machine is ready for use again.
6. The AquaClean light will flash for a while to remind you to install a new AquaClean water filter.
7. Install and activate a new AquaClean water filter in the water tank.
Important:
Follow the steps below:
Tip: AquaClean reduces the descaling frequency.
If Interrupted:
Before brewing, do a manual rinse:
This video will help you to descale your Philips 5000 espresso machine. For detailed step by step instructions, check the user manual.
The information on this page applies to the following models: EP5547/90, EP4446/70.
Can I use a different filter in my Philips Espresso Machine?
How to descale my Philips Espresso Machine
How to clean and maintain my Philips Espresso Machine
How do I use the Philips Coffee oil remover tablets?
How to lubricate the brew group of my Philips Espresso Machine
How to adjust the drink volume of my Philips Espresso Machine
Contacting Philips
We're happy to help you
Looking for something else?
Discover all Philips Support options